Skip to content
Appointment timing depends on ZIP code, route capacity, and appliance type.
Whirlpool kitchen and laundry repair. Clear estimates before any work begins.
Call (310) 448-6692

Whirlpool

Whirlpool Cooktop F1E0 Error Code

Book a Repair (310) 448-6692
Maya Ortiz Written by Maya Ortiz Appliance Repair Content Specialist Published October 20, 2026

Whirlpool

Code overview at a glance.

The facts for this Whirlpool error, a plain-language snapshot, and what to confirm against your model number.

Error code F1E0
Appliance Cooktop
Quick answer

F1E0 on an electric or radiant Whirlpool cooktop indicates one or more keys are permanently pressed. Cleaning the control panel and a power reset are the listed steps.

Model note: Whirlpool reuses codes across series and model years, so F1E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Whirlpool

What this code may mean.

A plain-language reading of the code — always confirm against your model’s documentation.

F1E0 indicates that one or more keys are permanently pressed.

When F1E0 shows, the cooktop is reading one or more of its touch keys as pressed all the time. Lights may flash and the cooktop may beep or sound audio tones while it happens.

Clean the control area first

  1. Check that every cooktop control is off.
  2. Take away anything left on the control area and wipe debris off the control panel surface.
  3. Clean the touch control panel thoroughly.

Then reset the power

The help text adds that there may be a problem with the cooktop control or its wiring. Cut power at the circuit breaker for one minute, switch it back on, and watch the cooktop for one minute. If F1E0 stays off the display and the cooktop works, the reset did the job.

Related codes

  • F13: touch control module communication error
  • F1E7: cooktop control or wiring

Whirlpool cooktop repair in Los Angeles

If keys keep sticking after cleaning and a reset, call (310) 448-6692 for Whirlpool cooktop service in Los Angeles. Our cooktop repair page explains what is covered. Tell us the code, the model number and what you cleaned or reset.

Source: Whirlpool Product Help: F1E0 – Electric Cooktop

Whirlpool

Safety warning before you continue.

Stop immediately if you notice smoke, sparks, a burning smell, gas odor, or water near electrical parts.

Important

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Whirlpool

Seeing this code on your appliance?

Book an Whirlpool appliance service visit for a clear estimate and approval before any repair.

Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (310) 448-6692

Whirlpool

Ready to restore your Whirlpool appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (310) 448-6692

Whirlpool

Tell us what’s wrong — we’ll take it from there.

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Prefer to call? (310) 448-6692
  1. Share the symptom Tell us the Whirlpool model and what’s going wrong.
  2. Confirm a window We’ll schedule a visit that fits your day.
  3. Approve before work You get a clear estimate — nothing starts without your OK.
Phone (310) 448-6692
Email info@whirlpoollosangeles.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Los Angeles County and Orange County.
Response time Appointment timing depends on ZIP code, route capacity, and appliance type.
(310) 448-6692 Book a Repair